Pet Nail Clipper with Guided Cutting Head
Two head sizes are held in stock so that the smaller head serves cats and fine claws while the larger head serves medium and larger dogs. The body measures approximately 6.5 cm and weighs about 23 g, with a soft TPR overmould on the handle.
The cutting members are stainless steel with a corrosion-resistant finish, and components are supplied in base polymer form with no surface coating applied. This product is a mechanical grooming article used for coat maintenance and is positioned as a general consumer article.
Key Features
Guide Hole Holds the Claw in Place
Reducing sideways slipping and splaying at the moment of the cut.
Small & Large Head Sizes in One Series
Covering both cats and dogs from the same handle design.
Crescent Notch for Broader Claws
Complements the round aperture for broader or thicker claws.
Stainless Steel Cutting Members
With a corrosion-resistant finish.
Light 23 g Body
With a contoured, cushioned grip that suits extended handling.
Hang-Hole Blister Card in Pink or Blue
Shelf-ready on arrival.
Conical Aperture Receives the Claw
Holds it in position before the blade closes.
Smaller Head for Cats & Fine Claws
The smaller head serves cats and fine claws.
Larger Head for Medium & Larger Dogs
The larger head serves medium and larger dogs.
Soft TPR Overmould Handle
With a soft TPR overmould on the handle.
Material & Formulation Disclosure
| Cutting members | Stainless steel, corrosion-resistant finish; grade declaration issued on request |
|---|---|
| Body | Moulded polymer shell |
| Handle overlay | Thermoplastic rubber (TPR) |
| Fasteners | Steel pivot pin |
| Surface treatment | Components supplied in base polymer form with no surface coating applied |
No biological-control, therapeutic or skin-treatment function is asserted for this article.
Product Specifications
| Reference code | TS-PET-GRN-011 |
|---|---|
| Product | Pet nail clipper, guided cutting head |
| Head sizes | Small head (cats, fine claws) / large head (medium and larger dogs) |
| Cutting geometry | Conical guide aperture plus crescent notch |
| Overall length | Approximately 6.5 cm |
| Unit weight | Approximately 23 g |
| Colourways in stock | Pink, blue |
| Operation | Manual, single-hand squeeze |
| Ordering unit | 1 piece; small and large heads may be ordered as a two-piece set |
| Retail packaging | Sealed hang-hole blister card |
| Carton quantity / gross weight | Confirmed at order acceptance |
| Sample lead time / batch lead time | Confirmed at order acceptance |
Application Protocol
Settle the Animal
Rest the animal on a stable, non-slip surface and allow it to settle before beginning.
Extend the Claw
Press the paw pad gently to extend the claw and identify the clear extension beyond the live tissue beneath it.
Seat the Claw in the Guide Aperture
Seat the claw in the guide aperture, keeping the aperture facing downward so the live tissue remains visible.
Apply a Single Squeeze
Apply a firm, single squeeze. Trim only the clear extension; do not cut into the shaded area beneath it.
Repeat Claw by Claw and Clean
Repeat claw by claw, pausing between paws. Finish by wiping the blades clean and storing the clipper dry.
Application Scenarios
Cats & Fine Claws
The small head serves cats and fine claws.
Medium & Larger Dogs
The large head serves medium and larger dogs.
Single-Hand Squeeze Operation
Manual operation with a single-hand squeeze.
Extended Handling Sessions
The light 23 g body with a contoured, cushioned grip suits extended handling.
Retail Shelf Display
Sealed hang-hole blister card in pink or blue, shelf-ready on arrival.
Safety Information
For Adult Operation Only
For adult operation only. Keep out of reach of children and never leave the tool within a child’s reach after use.
Supervise Continuously
Use under continuous supervision and never restrain an animal forcibly during trimming.
Trim Only the Clear Extension
Trim only the clear extension of the claw and avoid the live tissue beneath it; if bleeding occurs, apply gentle pressure and seek veterinary advice.
Do Not Use on Injured or Infected Claws
Do not use on injured or infected claws.
Packaging, Carton & Freight Profile
| Ordering unit | 1 piece; small and large heads may be ordered as a two-piece set |
|---|---|
| Retail packaging | Sealed hang-hole blister card; card artwork printed to buyer specification |
| Alternative packing | OPP pouch available for buyers who print their own cards |
| Carton quantity / gross weight | Confirmed at order acceptance |
| Export cartons | Neutral export cartons with outer-marking to buyer specification; pallet configuration advised at order acceptance |
| Private label | Unbranded stock held for private-label, own-brand and OEM artwork programmes |
Compliance & Commercial Notes
This product is a mechanical grooming article used for coat maintenance. It is placed on the EU market as a general consumer article under the General Product Safety Regulation, and is assessed for California Proposition 65 labelling before first shipment to the United States.
Documentation: Blade hardness and edge integrity are sampled on incoming batches. Corrosion resistance of the cutting members is verified against a salt-spray procedure on request. A stainless steel grade declaration is available for customs and buyer compliance files. Blister seal integrity and hang-hole positioning are checked before export packing.
Commercial terms: Minimum order quantities are set low to support first-order market testing; exact figures on request. Sample orders are accepted before commitment, with blister card artwork proofing for private-label runs. Payment is by telegraphic transfer: 30 percent deposit on order confirmation with the balance before dispatch. Delivery terms are FOB Shanghai or FOB Ningbo; consolidated shipment with other ToShine lines is arranged on request. Written confirmation of carton quantity, unit weight and dispatch window is issued with every proforma invoice.
Frequently Asked Questions
What is TS-PET-GRN-011?
TS-PET-GRN-011 is a manually operated pet nail clipper with a guided cutting head for cat and dog claws.
What head sizes are available?
A small head for cats and fine claws and a large head for medium and larger dogs.
What is the cutting geometry?
A conical guide aperture plus a crescent notch for broader or thicker claws.
What are the dimensions and weight?
Approximately 6.5 cm overall length and approximately 23 g.
How does the guide hold the claw?
The conical aperture receives the claw and holds it in position before the blade closes.
What colours are in stock?
Pink and blue.
What material are the cutting members?
Stainless steel with a corrosion-resistant finish; a grade declaration is issued on request.
What should be trimmed?
Only the clear extension of the claw; avoid the live tissue beneath it.
Is a private label available?
Yes. Unbranded stock is held for private-label, own-brand and OEM artwork programmes.
Can it be used on injured claws?
No. Do not use on injured or infected claws.
Interested in TS-PET-GRN-011?
Contact ToShine for wholesale pricing, samples, private-label conversion, packaging options and export documentation.
Private-label packaging and wholesale options are available for qualified buyers.
